Versatile. Long lasting. Low fuming.
In creating PermaMop® modified roofing asphalt, we didn’t just one-up regular asphalts, we’ve three-upped them.
PermaMop is versatile. It’s specially formulated for use on any slope of roof. It has the softening point of a Type IV asphalt but with a lower equiviscous temperature (EVT) than any standard Type IV. It stays where it’s mopped, even on steep-sloped roofing in intense heat.
PermaMop is long lasting. In laboratory testing, ordinary asphalt exceeds 60 weather cycles (approximately 15 years). PermaMop lasts a minimum of 150% longer – withstanding up to 193 cycles. Making it an ideal choice for projects in extreme weather areas – whether it’s heat, cold or moisture.
PermaMop is low fuming. Its composition includes a technologically advanced polymer additive. When heated, the polymer floats to the surface and creates a skim layer on the kettle that traps the fumes and odor inside – without affecting the asphalt or disrupting kettle operation.
PermaMop. Just another example of how Trumbull is using Applied Innovation™ to create products that solve our customers’ biggest needs.
PermaMop® Modified Asphalt Brochure
PermaMop® MSDS Sheet |
| Features |
Benefits |
| All products meet ASTM D312 |
Each shipment meets or exceeds the physical requirements of the specified roofing grade asphalt |
|
| Consistent high flash material |
Proper temperature range needed to apply product safely at the EVT; flash points typically 50ºF to 75ºF higher than the 500ºF minimum |
|
| Testing in each plant and at Summit, IL laboratory |
All Owens Corning Trumbull products are assured to meet ASTM requirements |
|
| 19 producing plants |
Convenient, accessible availability from coast to coast |
|
| EVT shown on each carton and bill of lading for bulk shipments |
Assures proper adhesion, waterproofing and application rate |
|
| Printed cartons |
Clearly identifies manufacturers, type, flash point, EVT, production location and production date |
Physical Requirements - ASTM D312-00
| |
Type I |
Type II |
Type III |
Type IV |
Test Methods |
| |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
| Softening Point (ºF) |
135 |
151 |
158 |
176 |
185 |
205 |
210 |
225 |
ASTM D36 |
|
| Flash Point (ºF) |
500 |
– |
500 |
– |
500 |
– |
500 |
– |
ASTM D92 |
|
| Penetration, Units, dmm: |
| @32ºF |
3 |
– |
6 |
– |
6 |
– |
6 |
– |
ASTM D5 |
| @77ºF |
18 |
60 |
18 |
40 |
15 |
35 |
12 |
25 |
|
| @115ºF |
90 |
180 |
– |
100 |
– |
90 |
– |
75 |
|
|
| Ductility @77ºF, cm |
10.0 |
– |
3.0 |
– |
2.5 |
– |
1.5 |
– |
ASTM D113 |
|
| Solubility in Trichoroethylene % |
99 |
– |
99 |
– |
99 |
– |
99 |
– |
ASTM D2042 |
|
| Asphalts shall be homogenous and free of water and shall conform to these physical properties |
Typical Physical Characteristics for Trumbull Asphalt
| |
PermaMop |
|
| Softening Point (ºF) |
215-235 |
|
|
| Flash Point (ºF) |
525 |
|
|
| Penetration, Units, dmm: |
| @32ºF |
7 |
|
| @77ºF |
18 |
|
|
| Ductility @77ºF, cm |
7.0 |
|
|
| Solubility in Trichoroethylene % |
97.5 |
|
|
| Typical Application Temperature |
|
|
| For Hand Mopping |
|
|
| EVT @125 CPS +/- 25ºF |
375 |
|
| For Machine Spreader |
|
|
| EVT @ 75 CPS +/- 25ºF |
395 |
|
|
| Plant Specific EVTs |
|
|
